INSTALLATION NOTES for OpenBSD/landisk 4.2 What is OpenBSD? ---------------- OpenBSD is a fully functional, multi-platform UN*X-like Operating System based on Berkeley Networking Release 2 (Net/2) and 4.4BSD-Lite. There are several operating systems in this family, but OpenBSD differentiates itself by putting security and correctness first. The OpenBSD team strives to achieve what is called a 'secure by default' status. This means that an OpenBSD user should feel safe that their newly installed machine will not be compromised. This 'secure by default' goal is achieved by taking a proactive stance on security. Since security flaws are essentially mistakes in design or implement- ation, the OpenBSD team puts as much importance on finding and fixing existing design flaws and implementation bugs as it does writing new code. This means that an OpenBSD system will not only be more secure, but it will be more stable. The source code for all critical system components has been checked for remote-access, local-access, denial- of-service, data destruction, and information-gathering problems. In addition to bug fixing, OpenBSD has integrated strong cryptography into the base system. A fully functional IPsec implementation is provided as well as support for common protocols such as SSL and SSH. Network filtering and monitoring tools such as packet filtering, NAT, and bridging are also standard, as well as several routing services, such as BGP and OSPF. For high performance demands, support for hardware cryptography has also been added to the base system. Because security is often seen as a tradeoff with usability, OpenBSD provides as many security options as possible to allow the user to enjoy secure computing without feeling burdened by it. To integrate more smoothly in other environments, OpenBSD 4.2 also provides, on some platforms, several binary emulation subsystems (which includes iBCS2, Linux, OSF/1, SunOS, SVR4, Solaris, and Ultrix compatibility), aiming at making the emulation as accurate as possible so that it is transparent to the user. Because OpenBSD is from Canada, the export of Cryptography pieces (such as OpenSSH, IPsec, and Kerberos) to the world is not restricted. (NOTE: OpenBSD can not be re-exported from the US once it has entered the US. Because of this, take care NOT to get the distribution from an FTP server in the US if you are outside of Canada and the US.) A comprehensive list of the improvements brought by the 4.2 release is available on the web at http://www.OpenBSD.org/42.html. OpenBSD/landisk runs on various network appliances based on an IO-DATA design with an Hitachi/Renesas SuperH CPU. Sources of OpenBSD: ------------------- This is a list of currently known FTP servers at the time of the 4.2 release. For a more recent list, please refer to http://www.OpenBSD.org/ftp.html Main server in Canada: ftp://ftp.OpenBSD.org/pub/OpenBSD (Alberta) 2nd level mirrors: ftp://spargel.kd85.com/pub/OpenBSD (Vienna) ftp://openbsd.informatik.uni-erlangen.de/pub/OpenBSD (Erlangen) ftp://ftp.stacken.kth.se/pub/OpenBSD (Stockholm) ftp://ftp5.usa.openbsd.org/pub/OpenBSD (Redwood City, CA) ftp://ftp3.usa.openbsd.org/pub/OpenBSD (Boulder, CO) ftp://rt.fm/pub/OpenBSD (Lake in the Hills, IL) Argentina: ftp://ftp.openbsd.md5.com.ar/pub/OpenBSD (Buenos Aires) Australia: ftp://ftp.it.net.au/mirrors/OpenBSD (Perth) Austria: ftp://playboy.wu-wien.ac.at/pub/OpenBSD (Vienna) Belgium: ftp://ftp.scarlet.be/pub/openbsd (Brussels) ftp://ftp.belnet.be/packages/openbsd (Brussels) Brazil: ftp://ftp.das.ufsc.br/pub/OpenBSD (Florianopolis, Santa Catarina) Bulgaria: ftp://ftp.bg.openbsd.org/pub/OpenBSD (Plovdiv) Canada: ftp://mirror.arcticnetwork.ca/pub/OpenBSD (Calgary) ftp://ftp.ca.openbsd.org/pub/OpenBSD (Edmonton) ftp://gulus.usherbrooke.ca/pub/distro/OpenBSD (Quebec) China: ftp://ftp.freebsdchina.org/pub/OpenBSD (Shanghai) Denmark: ftp://mirrors.dotsrc.org/openbsd (Aalborg) ftp://ftp.dkuug.dk/pub/OpenBSD (Copenhagen) Estonia: ftp://ftp.aso.ee/pub/OpenBSD (Tallinn) Finland: ftp://mirrors.nic.funet.fi/pub/OpenBSD (Espoo) ftp://ftp.jyu.fi/pub/OpenBSD (Jyvaskyla) France: ftp://ftp.arcane-networks.fr/pub/OpenBSD (Paris) ftp://ftp.crans.org/pub/OpenBSD (Paris) ftp://ftp.irisa.fr/pub/OpenBSD (Rennes) Germany: ftp://openbsd.ftp.fu-berlin.de/pub/OpenBSD (Berlin) ftp://ftp.spline.de/pub/OpenBSD (Berlin) ftp://ftp.freenet.de/pub/ftp.openbsd.org/pub/OpenBSD (Duesseldorf) ftp://ftp-stud.fht-esslingen.de/pub/OpenBSD (Esslingen) ftp://mirror.roothell.org/pub/OpenBSD (Nuremberg) ftp://ftp.bytemine.net/pub/OpenBSD (Oldenburg) Greece: ftp://filoktitis.noc.uoa.gr/pub/OpenBSD (Athens) ftp://ftp.physics.auth.gr/pub/mirrors/OpenBSD/OpenBSD (Thessaloniki) ftp://ftp.duth.gr/pub/OpenBSD (Thrace) ftp://ftp.cc.uoc.gr/mirrors/OpenBSD (Heraklion) Hungary: ftp://ftp.fsn.hu/pub/OpenBSD (Budapest) Ireland: ftp://ftp.esat.net/pub/OpenBSD (Dublin) ftp://ftp.heanet.ie/pub/OpenBSD (Dublin) Israel: ftp://mirror.inter.net.il/pub/OpenBSD (Petach Tiqwa) Italy: ftp://ftp.unina.it/pub/OpenBSD (Napoli) Japan: ftp://ftp.jaist.ac.jp/pub/OpenBSD (Ishikawa) ftp://ftp.nara.wide.ad.jp/pub/OpenBSD (Nara) ftp://ftp.jp.openbsd.org/pub/OpenBSD (Tokyo) ftp://ftp.kddlabs.co.jp/OpenBSD (Tokyo) Korea: ftp://ftp.kaist.ac.kr/pub/OpenBSD (Daejeon) Latvia: ftp://ftp.secure.lv/pub/OpenBSD (Riga) ftp://ftp.bsd.lv/pub/OpenBSD (Riga) The Netherlands: ftp://ftp.calyx.nl/pub/OpenBSD (Amsterdam) ftp://ftp.nluug.nl/pub/OpenBSD (Utrecht) ftp://mirror.hostfuss.com/pub/OpenBSD (Amsterdam) Norway: ftp://ftp.inet.no/pub/OpenBSD (Oslo) ftp://ftp.uninett.no/pub/OpenBSD (Oslo) ftp://jane.tihlde.org/pub/OpenBSD (Trondheim) Poland: ftp://ftp.task.gda.pl/pub/OpenBSD (Gdansk) Portugal: ftp://ftp.fmed.uc.pt/pub/OpenBSD (Coimbra) Russia: ftp://ftp.chg.ru/pub/OpenBSD (Chernogolovka-Moscow) ftp://ftp.gamma.ru/pub/OpenBSD (Moscow) Slovenia: ftp://ftp.obsd.si/pub/OpenBSD (Ljubljana) Spain: ftp://ftp.rediris.es/mirror/OpenBSD (Madrid) ftp://ftp.udc.es/pub/OpenBSD (A Coruna) Sweden: ftp://ftp.su.se/pub/OpenBSD (Stockholm) ftp://ftp.btradianz.se/pub/OpenBSD (Stockholm) Switzerland: ftp://mirror.switch.ch/pub/OpenBSD (Zurich) Turkey: ftp://ftp.enderunix.org/pub/OpenBSD (Istanbul) Ukraine: ftp://gaia.colocall.net/pub/OpenBSD (Kiev) United Kingdom: ftp://ftp.public-internet.co.uk/pub/OpenBSD (London) ftp://ftp.mirrorservice.org/pub/OpenBSD (Kent) USA: ftp://mirror.planetunix.net/pub/OpenBSD (Chicago, IL) ftp://osmirrors.cerias.purdue.edu/pub/OpenBSD (West Lafayette, IN) ftp://mirror.iawnet.sandia.gov/pub/OpenBSD (Albuquerque, NM) ftp://ftp.cse.buffalo.edu/pub/OpenBSD (Buffalo, NY) ftp://mirrors.24-7-solutions.net/pub/OpenBSD (New York, NY) ftp://openbsd.mirrors.pair.com (Pittsburgh, PA) ftp://carroll.cac.psu.edu/pub/OpenBSD (PA) ftp://openbsd.mirrors.tds.net/pub/OpenBSD (Madison, WI) Additionally, the file ftp://ftp.OpenBSD.org/pub/OpenBSD/ftplist contains a list which is continually updated. If you wish to become a distribution site for OpenBSD, contact . OpenBSD 4.2 Release Contents: ----------------------------- The OpenBSD 4.2 release is organized in the following way. In the .../4.2 directory, for each of the architectures having an OpenBSD 4.2 binary distribution, there is a sub-directory. The landisk-specific portion of the OpenBSD 4.2 release is found in the "landisk" subdirectory of the distribution. That subdirectory is laid out as follows: .../4.2/landisk/ INSTALL.landisk Installation notes; this file. MD5 Output of the md5(1) program, usable for verification of the correctness of downloaded files. miniroot42.fs A miniroot filesystem image to be copied to the beginning of the disk to allow installing OpenBSD 4.2. *.tgz landisk binary distribution sets; see below. bsd A stock GENERIC landisk kernel which will be installed on your system during the install. bsd.rd A compressed RAMDISK kernel; the embedded filesystem contains the installation tools. Used for simple installation from a pre-existing system. The OpenBSD/landisk binary distribution sets contain the binaries which comprise the OpenBSD 4.2 release for landisk systems. There are eleven binary distribution sets. The binary distribution sets can be found in the "landisk" subdirectory of the OpenBSD 4.2 distribution tree, and are as follows: base42 The OpenBSD/landisk 4.2 base binary distribution. You MUST install this distribution set. It contains the base OpenBSD utilities that are necessary for the system to run and be minimally functional. It excludes everything described below. [ 83.2 MB gzipped, 170.7 MB uncompressed ] comp42 The OpenBSD/landisk Compiler tools. All of the tools relating to C, C++, Objective-C and Fortran are supported. This set includes the system include files (/usr/include), the linker, the compiler tool chain, and the various system libraries. This set also includes the manual pages for all of the utilities it contains, as well as the system call and library manual pages. [ 59.4 MB gzipped, 172.7 MB uncompressed ] etc42 This distribution set contains the system configuration files that reside in /etc and in several other places. This set MUST be installed if you are installing the system from scratch, but should NOT be used if you are upgrading. (If you are upgrading, it's recommended that you get a copy of this set and CAREFULLY upgrade your configuration files by hand; see the section named Upgrading a previously-installed OpenBSD System" below.) [ 1.1 MB gzipped, 3.8 MB uncompressed ] game42 This set includes the games and their manual pages. [ 6.8 MB gzipped, 12.4 MB uncompressed ] man42 This set includes all of the manual pages for the binaries and other software contained in the base set. Note that it does not include any of the manual pages that are included in the other sets. [ 7.2 MB gzipped, 26.3 MB uncompressed ] misc42 This set includes the system dictionaries (which are rather large), and the typesettable document set. [ 2.1 MB gzipped, 7.2 MB uncompressed ] xbase42 This set includes the base X distribution. This includes programs, headers and libraries. [ 80.8 MB gzipped, 133.7 MB uncompressed ] xetc42 This set includes the X window system configuration files that reside in /etc. It's the equivalent of etc42 for X. [ 968.3 KB gzipped, 1.6 MB uncompressed ] xfont42 This set includes all of the X fonts. [ 31.6 MB gzipped, 35.8 MB uncompressed ] xshare42 This set includes all text files equivalent between all architectures. [ 1.9 MB gzipped, 10.4 MB uncompressed ] OpenBSD System Requirements and Supported Devices: -------------------------------------------------- OpenBSD/landisk runs on the following SH4-based IO-DATA made models: IO-DATA USL-5P, using CF storage (Japan) IO-DATA HDL-U, HDL-AV, HDL-W and HDLM-U series (Japan) SuperTank LAN Tank (SOTO-HDLWU) (Japan) IO-DATA UHDL-160U and UHDL-300U (May be found in USA) Plextor PX-EH16L, PX-EH25L and PX-EH40L Supported devices include: Ethernet Adapters ADMtek AN986-based USB adapters, including: Abocom UFE1000 Abocom DSB650TX Accton USB320-EC Accton SpeedStream Ethernet Admtek Pegasus, Pegasus II Billionton Systems USB100 Corega FEther USB-TX D-Link DSB-650, 650TX, 650TX-PNA Elecom LD-USB Elsa Microlink USB2Ethernet I/O Data USB ETTX Kingston KNU101TX Linksys USB100TX, USB100H1 and USB10TA Melco Inc. LUA-TX Siemens SpeedStream USB SmartBridges smartNIC 2 SMC 2202USB/ETH SMC 2206USB/ETH SOHOware NUB100 ASIX Electronics AX88172/AX88178/AX88772 USB Ethernet adapters, including: ATEN UC210T BAFO BF-320 Billionton Systems USB2AR Buffalo(MELCO) LUA-U2-KTX Corega FEther USB2-TX D-Link DUB-E100 Good Way GWUSB2E Hawking UF200 Intellinet USB 2.0 to Ethernet (rev A) IO-Data ETG-US2 JVC MP-PRX1 Level One USB-0200 Linksys USB200M Netgear FA120 Nintendo Wii USB Lan Ethernet Adapter RVL-015 OQO model 01+ Ethernet Sitecom LN-029 SMC 2209USB/ETH SnapPort USB 2.0 LAN Adapter ST Lab USB 2.0 Fast Ethernet Surecom EP-1427X-2 System TALKS SGC-X2UL TRENDnet TU2-ET100 Z-TEK ZK-R01-2 CATC USB-EL1210A-based USB adapters, including: CATC Netmate and Netmate II Belkin F5U011/F5U111 Davicom DM9601 based USB adapters, including: Corega FEther USB-TXC HenTong WK-668 ShanTou ST268 Kawasaki LSI KL5KUSB101B-based USB adapters, including: 3Com 3c19250 3Com 3c460 HomeConnect AboCom Systems URE450 Ethernet ADS Technologies USB-10T Aox USB101 Asante USB to Ethernet ATen DSB-650C ATen UC10T Corega USB-T D-Link DSB-650C Entegra NET-USB-E45 I/O Data USB-ET/T Jaton USB XpressNet Kawasaki USB101 Kingston Ethernet Linksys USB10T Mobility Ethernet Netgear EA101 Peracom USB Portgear Ethernet Portsmith Express Ethernet Psion Dacom Gold Port Ethernet Shark Pocket Adapter Silicom U2E SMC 2102/2104USB RealTek RTL8150L based USB adapters, including: Abocom RTL8151 BAFO BF-310 Billionton USBKR-100 Compex UE202-B GreenHouse GH-USB100B GreenHouse GH-USB100B with HomePNA Hawking Technology HUF11 Linksys USB100M Longshine LCS-8138TX Melco Inc. LUA-KTX Micronet SP128AR NetComm NP1010 Repotec RP-USB100-A SMC 2208USB/ETH TRENDnet TU-ET100C Zt USB10/100 Z-TEK ZK-R02 Wireless Ethernet Adapters Atheros USB IEEE 802.11a/b/g adapters Compex WLU108AG Compex WLU108G D-Link DWL-G132 Netgear WG111T Netgear WG111U Netgear WPN111 Olitec 000544 PLANET WDL-U357 Siemens Gigaset 108 SMC SMCWUSBT-G SparkLAN WL-785A TP-Link TL-WN620G TRENDware International TEW-444UB TRENDware International TEW-504UB Unex Technology UR054ag ZyXEL XtremeMIMO M-202 Atmel AT76C50x based USB IEEE 802.11b adapters 3Com 3CRSHEW696 AboCom BWU613 Accton 2664W Acer Peripherals AWL300 Acer Peripherals AWL400 Actiontec 802UAT1 Addtron AWU120 Aincomm AWU2000B Askey Computer Voyager 1010 Askey Computer WLL013 (Intersil Radio) Askey Computer WLL013 (RFMD Radio) Belkin F5D6050 Bluetake BW002 Compaq iPAQ h54xx/h55xx Internal WLAN Conceptronic C11U Conceptronic WL210 Corega WLAN USB Stick 11 Dick Smith Electronics CHUSB 611G Dick Smith Electronics WL200U Dick Smith Electronics WL240U Dick Smith Electronics XH1153 D-Link DWL-120 rev E Geowave GW-US11S Gigabyte GN-WLBM101 Gigaset WLAN Hewlett-Packard HN210W Intel AP310 AnyPoint II I/O DATA USB WN-B11 Lexar 2662W-AR Linksys WUSB11 Linksys WUSB11 v2.8 MSI WLAN Netgear MA101 Netgear MA101 rev B Ovislink AirLive WL-1120USB OvisLink AirLive WL-1130USB Planex Communications GW-US11S Samsung SWL2100W Siemens WLL013 SMC 2662W-AR SMC 2662W-V4 Tekram U-300C Z-Com M4Y-750 Intersil PRISM 2.5/3 based USB IEEE 802.11b adapters Acer Warplink USB-400 Actiontec HWU01170 AirVast WM168b Ambit WLAN Apacer Wireless Steno MB112 ASUS WL-140 Compaq W100 Corega WLUSB-11 Corega WLUSB-11 Key D-Link DWL-120 (rev F) D-Link DWL-122 I-O DATA WN-B11/USB Intel PRO/Wireless 2011B Intersil Prism 2X JVC MP-XP7250 Linksys WUSB11 v3.0 Linksys WUSB12 Melco WLI-USB-KB11 Melco WLI-USB-KS11G Melco WLI-USB-S11 Microsoft MN510 Netgear MA111 (version 1) Pheenet WL-503IA Planex GW-US11H Siemens SpeedStream SS1022 Sitecom WL-022 Syntax USB-400 US Robotics 1120 ViewSonic Airsync Z-Com XI-725/726 Z-Com XI-735 ZyXEL ZyAIR B-200 Ralink RT2500 based USB 2.0 IEEE 802.11b/g adapters AMIT WL532U ASUS WL-167g Belkin F5D7050 Buffalo WLI-U2-KG54 Buffalo WLI-U2-KG54-AI Buffalo WLI-U2-KG54-YB CNet CWD-854 Compex WLU54G Conceptronic C54RU D-Link DWL-G122 (b1) Dynalink WLG25USB E-Tech WGUS02 Eminent 3035 Gigabyte GN-WBKG Hercules HWGUSB2-54 KCORP LifeStyle KLS-685 Linksys WUSB54G v4 Linksys WUSB54GP v4 MSI MS-6861 MSI MS-6865 MSI MS-6869 SerComm UB801R SparkLAN WL-685R Sphairon UB801R Surecom EP-9001-g rev 3A Tonze UW-6200C Zaapa ZNWUSB-54 Zinwell ZWX-G261 Zonet ZEW2500P Ralink RT2501USB/RT2601USB USB 2.0 IEEE 802.11/a/b/g adapters 3Com Aolynk WUB320g Abocom WUG2700 Airlink101 AWLL5025 Belkin F5D7050 ver 3 Belkin F5D9050 ver 3 Buffalo WLI-U2-SG54HP Buffalo WLI-U2-G54HP CNet CWD-854 ver F Conceptronic C54RU ver 2 Corega CG-WLUSB2GO D-Link DWL-G122 rev C1 D-Link WUA-1340 Digitus DN-7003GR Edimax EW-7318USG Gigabyte GN-WB01GS Hawking HWUG1 Hawking HWU54DM Hercules HWGUSB2-54-LB Hercules HWGUSB2-54V2-AP LevelOne WNC-0301USB v3 Linksys WUSB54G rev C Linksys WUSB54GR Planex GW-US54HP Planex GW-US54Mini2 Planex GW-USMM Senao NUB-3701 Sitecom WL-113 ver 2 Sitecom WL-172 Sweex LW053 TP-LINK TL-WN321G ZyDAS ZD1211/ZD1211B USB IEEE 802.11b/g adapters 3COM 3CRUSB10075 Acer WLAN-G-US1 Airlink+ AWLL3025 Airlink 101 AWLL3026 AOpen 802.11g WL54 Asus A9T integrated wirless Asus WL-159g Belkin F5D7050 v.4000 Billion BiPAC 3011G Buffalo WLI-U2-KG54L CC&C WL-2203B DrayTek Vigor 550 Edimax EW-7317UG Fiberline Networks WL-43OU iNexQ UR055g Linksys WUSBF54G Longshine LCS-8131G3 MSI US54SE Philips SNU5600 Planet WL-U356 Planex GW-US54GZL Planex GW-US54Mini Safecom SWMULZ-5400 Sagem XG 760A Sagem XG 76NA Sandberg Wireless G54 USB Sitecom WL-113 SMC SMCWUSB-G Sweex wireless USB 54 Mbps Tekram/Siemens USB adapter Telegent TG54USB Trendnet TEW-424UB Trendnet TEW-429UB TwinMOS G240 US Robotics 5423 X-Micro XWL-11GUZX Yakumo QuickWLAN USB Zonet ZEW2501 Zyxel ZyAIR G-220 Serial ports On-board serial (scif) port Universal Serial Bus (USB) Devices USB Audio USB Diamond Multimedia Rio MP3 players USB Ethernet adapters, see above USB Generic Human Interface Devices (catch-all) USB Handspring Visor USB Hubs USB Keyboards USB Mass Storage devices, i.e., USB floppy drives and USB memory stick controllers USB Mice USB Modems USB Printers USB Scanners USB-USB cables USB Y@p phone Getting the OpenBSD System onto Useful Media: --------------------------------------------- Installation is supported from several media types, including: CD-ROM FFS partitions (for upgrades only) FTP HTTP Although you can access the distribution sets directly from the CD-ROM or from one of the FTP mirrors over the internet, you may wish to transfer the sets to a local FTP server, or copy them to a partition on the target system's disk (for upgrades only). The steps necessary to prepare the distribution sets for installation depend on which method of installation you choose. Some methods require a bit of setup first that is explained below. The installation allows installing OpenBSD directly from FTP mirror sites over the internet, however you must consider the speed and reliability of your internet connection for this option. It may save much time and frustration to use ftp get/reget to transfer the distribution sets to a local server or disk and perform the installation from there, rather than directly from the internet. The variety of options listed may seem confusing, but situations vary widely in terms of what peripherals and what sort of network arrangements a user has, the intent is to provide some way that will be practical. If you are upgrading OpenBSD, you also have the option of installing OpenBSD by putting the new distribution sets somewhere in your existing file system, and using them from there. To do that, do the following: Place the distribution sets you wish to upgrade somewhere in your current file system tree. At a bare minimum, you must upgrade the "base" binary distribution, and so must put the "base42" set somewhere in your file system. It is recommended that you upgrade the other sets, as well. Preparing your System for OpenBSD Installation: ----------------------------------------------- The default configuration of the landisk systems comes with a Linux installation on the disk (either an IDE hard drive, or a CompactFlash card). At the moment, there is no known way to log in this installation as ``root'' or interrupt the boot process, and start an OpenBSD installation procedure. Because of this, the only way to boot the OpenBSD install is to copy the miniroot "miniroot42.fs" image to the hard drive or CompactFlash (on the other hand, upgrades can be started by copying bsd.rd to the OpenBSD disk and booting from it). As a result, you will need another machine to plug the machine's disk or CompactFlash in. Any machine type will do, as long as it supports ATA-compatible storage devices, regardless of the partition scheme it uses. Under OpenBSD, it will appear as a ``wd'' device, for example ``wd1''. Use the dd(1) utility to copy the miniroot to the hard drive. The command would likely be, under OpenBSD: dd if=miniroot42.fs of=/dev/rwd1c Replace ``rwd1c'' with the appropriate device name for the raw device on the system used to do the copy. If the machine has a hard drive, and you had to change jumpers on it to change its ``master'' status, do not forget to configure it back to ``master'' or ``single drive'', as slave drives are not bootable. In addition to the disk preparation, you will need to connect a serial port connector to the machine. Please refer to the OpenBSD/landisk page at http://www.OpenBSD.org/landisk.html for more information. Installing the OpenBSD System: ------------------------------ Installing OpenBSD is a relatively complex process, but if you have this document in hand and are careful to read and remember the information which is presented to you by the install program, it shouldn't be too much trouble. You should now be ready to install OpenBSD. The following is a walk-through of the steps you will take while getting OpenBSD installed on your hard disk. If any question has a default answer, it will be displayed in brackets ("[]") after the question. If you wish to stop the installation, you may hit Control-C at any time, but if you do, you'll have to begin the installation process again from scratch. Using Control-Z to suspend the process may be a better option, or at any prompt enter '!' to get a shell, from which 'exit' will return you back to that prompt (no refresh of the prompt though). If you have copied the miniroot image to the disk, it will boot automatically upon power-up. Once the kernel has loaded, you will be presented with the OpenBSD kernel boot messages. You will want to read them to determine your disks name and geometry. Its name will be something like "wd0". You will also need to know the device name to tell the install tools what disk to install on. If you cannot read the messages as they scroll by, do not worry -- you can get at this information later inside the install program. You will next be asked for your terminal type. You should just hit return to select the default (vt220). After entering the terminal type you will be asked whether you wish to do an "(I)nstall" or an "(U)pgrade". Enter 'I' for a fresh install or 'U' to upgrade an existing installation. You will be presented with a welcome message and asked if you really wish to install (or upgrade). Assuming you answered yes, the install program will then tell you which disks of that type it can install on, and ask you which it should use. Reply with the name of your disk. Next you will have to edit or create a disk label for the disk OpenBSD is being installed on. You will first be given an opportunity to run fdisk and create an OpenBSD partition. Fdisk will start by displaying the current partitions defined and then allow you to modify this information, add new partitions and change which partition to boot from by default. If you make a mistake, you will be allowed to repeat this procedure as necessary to correct this. Note that you should make OpenBSD be the active partition at least until the install has been completed. Next the disk label which defines the layout of the OpenBSD file systems must be set up. The installation script will invoke an interactive editor allowing you to do this. Note that partition 'c' inside this disk label should ALWAYS reflect the entire disk, including any non-OpenBSD portions. If you are labeling a new disk, you will probably start out with an 'a' partition that spans the disk. In this case you should delete 'a' before adding new partitions. The root file system should be in partition 'a', and swap is usually in partition 'b'. It is recommended that you create separate partitions for /usr, /tmp, and /var, and if you have room for it, one for /home. In doing this, remember to skip 'c', leaving it as type "unused". For help in the disk label editor, enter '?' or 'M' to view the manual page (see the info on the ``-E'' flag). The swap partition (usually 'b') should have a type of "swap", all other native OpenBSD partitions should have a type of "4.2BSD". The install program will now label your disk and ask which file systems should be created on which partitions. It will auto- matically select the 'a' partition to be the root file system. Next it will ask for which disk and partition you want a file system created on. This will be the same as the disk name (e.g. "wd0") with the letter identifying the partition (e.g. "d") appended (e.g. "wd0d"). Then it will ask where this partition is to be mounted, e.g. /usr. This process will be repeated until you enter "done". At this point you will be asked to confirm that the file system information you have entered is correct, and given an opportunity to change the file system table. Next it will create the new file systems as specified, OVERWRITING ANY EXISTING DATA. This is the point of no return. After all your file systems have been created, the install program will give you an opportunity to configure the network. The network configuration you enter (if any) can then be used to do the install from another system using HTTP or FTP, and will also be the configuration used by the system after the installation is complete. If you select to configure the network, the install program will ask you for the name of your system and the DNS domain name to use. Note that the host name should be without the domain part, and that the domain name should NOT include the host name part. Next the system will give you a list of network interfaces you can configure. For each network interface you select to configure, it will ask for the IP address to use, the symbolic host name to use, the netmask to use, and any interface-specific flags to set. The interface-specific flags are usually used to determine which media the network card is to use. Typically no media flags are required as autodetection normally works, but you will be prompted with a list of the acceptable media flags, and asked if you want to provide any. In doubt, do not enter any media flags; or you can refer to the manual page for your interface for the appropriate flags. After all network interfaces have been configured, the install pro- gram will ask for a default route and IP address of the primary name server to use. You will also be presented with an opportunity to edit the host table. At this point you will be allowed to edit the file system table that will be used for the remainder of the installation and that will be used by the finished system, following which the new file systems will be mounted to complete the installation. After these preparatory steps have been completed, you will be able to extract the distribution sets onto your system. There are several install methods supported; FTP, HTTP, tape, CD-ROM, or a local disk partition. Note that installation from floppies is not currently supported. To install via FTP: To begin an FTP install you will need the following pieces of information. Don't be daunted by this list; the defaults are sufficient for most people. 1) Proxy server URL if you are using a URL-based FTP proxy (squid, CERN FTP, Apache 1.2 or higher). You need to define a proxy if you are behind a firewall that blocks outgoing FTP (assuming you have a proxy available to use). 2) Do you need to use active mode FTP? By default, ftp will attempt to use passive mode and fall back to an active connection if the server does not support passive mode. You only need to enable this option if you are connecting to a buggy FTP daemon that implements passive FTP incorrectly. Note that you will not be asked about active FTP if you are using a proxy. 3) The IP address (or hostname if you enabled DNS earlier in the install) of an FTP server carrying the OpenBSD 4.2 distribution. If you don't know, answer ``y'' when asked if you want to see a list of such hosts. 4) The FTP directory holding the distribution sets. The default value of pub/OpenBSD/4.2/landisk is almost always correct. 5) The login and password for the FTP account. You will only be asked for a password for non-anonymous FTP. For instructions on how to complete the installation via FTP, see the section named "Common URL installations" below. To install via HTTP: To begin an HTTP install you will need the following pieces of information: 1) Proxy server URL if you are using a URL-based HTTP proxy (squid, CERN FTP, Apache 1.2 or higher). You need to define a proxy if you are behind a firewall that blocks outgoing HTTP connections (assuming you have a proxy available to use). 2) The IP address (or hostname if you enabled DNS earlier in the install) of an HTTP server carrying the OpenBSD 4.2 distribution. If you don't know, answer ``y'' when asked if you want to see a list of such hosts. 3) The directory holding the distribution sets. There is no standard location for this; You should use the directory specified along with the server in the list of official HTTP mirror sites that you received in step 3. For instructions on how to complete the installation via HTTP, see the section named "Common URL installations" below. To install from CD-ROM: When installing from a CD-ROM, you will be asked which device holds the distribution sets. This will typically be "cd0". Next you will be asked which partition on the CD-ROM the distribution is to be loaded from. This is normally partition "a". Next you will have to identify the file system type that has been used to create the distribution on the CD-ROM, this can be either FFS or ISO CD9660. The OpenBSD CD-ROM distribution uses the CD9660 format. You will also have to provide the relative path to the directory on the CD-ROM which holds the distribution, for the landisk this is "4.2/landisk". For instructions on how to complete the installation from the CD-ROM distribution, see the section named "Common file system installations" below. To install from a local disk partition: When installing from a local disk partition, you will first have to identify which disk holds the distribution sets. This is normally "wdN" or "sdN", where N is a number 0 through 9. Next you will have to identify the partition within that disk that holds the distribution; this is a single letter between 'a' and 'p'. You will also have to identify the type of file system residing in the partition identified. Currently, you can onlyinstall from partitions that have been formatted as the Berkeley fast file system (ffs). You will also have to provide the relative path to the directory on the file system where the distribution sets are located. Note that this path should not be prefixed with a '/'. For instructions on how to complete the installation from a local disk partition, see the next section. Common file system installations: The following instructions are common to installations from mounted disk partitions and CD-ROMs. A list of available distribution sets will be listed. You may individually select distribution sets to install or enter `all' to install all of the sets (which is what most users will want to do). You may also enter `list' to get a file list or `done' when you are done selecting distribution sets. You may also use wildcards in place of a file name, e.g. `*.tgz' or even `base*|comp*'. It is also possible to enter an arbitrary filename and have it treated as a file set. Once you have selected the file sets you want to install and entered `done' you will be prompted to verify that you really do want to extract file sets. Assuming you acquiesce, the files will begin to extract. If not, you will be given the option of installing sets via one of the other install methods. Common URL installations: Once you have entered the required information, the install program will fetch a file list and present a list of all the distribution sets that were found in the specified directory. (If no valid sets were found, you will be notified and given the option of unpacking any gzipped tar files found or getting a file list if none were found.) At this point you may individually select distribution sets to install or enter `all' to install all of the sets (which is what most users will want to do). You may also enter `list' to get a file list or `done' when you are done selecting distribution sets. You may also use wildcards in place of a file name, e.g. `*.tgz' or even `base*|comp*'. It is also possible to enter an arbitrary filename and have it treated as a file set. Once you have selected the file sets you want to install and entered `done' you will be prompted to verify that you really do want to download and install the files. Assuming you acquiesce, the files will begin to download and unpack. If not, you will be given the option of installing sets via one of the other install methods. When all the selected distribution sets has been extracted, you will be allowed to select which time zone your system will be using, all the device nodes needed by the installed system will be created for you, and the file systems will be unmounted. For this to work properly, it is expected that you have installed at least the "base42", "etc42", and "bsd" distribution sets. Congratulations, you have successfully installed OpenBSD 4.2. When you reboot into OpenBSD, you should log in as "root" at the login prompt. You should create yourself an account and protect it and the "root" account with good passwords. The install program leaves root an initial mail message. We recommend you read it, as it contains answers to basic questions you might have about OpenBSD, such as configuring your system, installing packages, getting more information about OpenBSD, sending in your dmesg output and more. To do this, run mail and then just enter "more 1" to get the first message. You quit mail by entering "q". Some of the files in the OpenBSD 4.2 distribution might need to be tailored for your site. We recommend you run: man afterboot which will tell you about a bunch of the files needing to be reviewed. If you are unfamiliar with UN*X-like system administration, it's recommended that you buy a book that discusses it. Upgrading a previously-installed OpenBSD System: ------------------------------------------------ Warning! Upgrades to OpenBSD 4.2 are currently only supported from the immediately previous release. The upgrade process will also work with older releases, but might not execute some migration tasks that would be necessary for a proper upgrade. The best solution, whenever possible, is to backup your data and reinstall from scratch. To upgrade OpenBSD 4.2 from a previous version, start with the general instructions in the section "Installing OpenBSD". Boot from bsd.rd on the boot disk. When prompted, select the (U)pgrade option rather than the (I)nstall option at the prompt in the install process. The upgrade script will ask you for the existing root partition, and will use the existing filesystems defined in /etc/fstab to install the new system in. It will also use your existing network parameters. From then, the upgrade procedure is very close to the installation procedure described earlier in this document. Note that the upgrade procedure will not let you pick the ``etc42.tgz'' set, so as to preserve your files in `/etc' which you are likely to have customized since a previous installation. However, it is strongly advised that you unpack the etc42.tgz set in a temporary directory and merge changes by hand, since all components of your system may not function correctly until your files in `/etc' are updated. Getting source code for your OpenBSD System: -------------------------------------------- Now that your OpenBSD system is up and running, you probably want to get access to source code so that you can recompile pieces of the system. A few methods are provided. If you have an OpenBSD CD-ROM, the source code is provided. Otherwise, you can get the pieces over the Internet using anonymous CVS, CTM, CVSync or FTP. For more information, see http://www.OpenBSD.org/anoncvs.html http://www.OpenBSD.org/ctm.html http://www.OpenBSD.org/cvsync.html http://www.OpenBSD.org/ftp.html Using online OpenBSD documentation: ----------------------------------- Documentation is available if you first install the manual pages distribution set. Traditionally, the UN*X "man pages" (documentation) are denoted by 'name(section)'. Some examples of this are intro(1), man(1), apropos(1), passwd(1), passwd(5) and afterboot(8). The section numbers group the topics into several categories, but three are of primary interest: user commands are in section 1, file formats are in section 5, and administrative information is in section 8. The 'man' command is used to view the documentation on a topic, and is started by entering 'man [section] topic'. The brackets [] around the section should not be entered, but rather indicate that the section is optional. If you don't ask for a particular section, the topic with the least-numbered section name will be displayed. For instance, after logging in, enter man passwd to read the documentation for passwd(1). To view the documentation for passwd(5), enter man 5 passwd instead. If you are unsure of what man page you are looking for, enter apropos subject-word where "subject-word" is your topic of interest; a list of possibly related man pages will be displayed. Adding third party software; ``packages'' and ``ports'': -------------------------------------------------------- As complete as your OpenBSD system is, you may want to add any of several excellent third party software applications. There are several ways to do this. You can: 1) Obtain the source code and build the application based upon whatever installation procedures are provided with the application. 2) Use the OpenBSD ``ports'' collection to automatically get any needed source file, apply any required patches, create the application, and install it for you. 3) Use the OpenBSD ``package'' collection to grab a pre-compiled and tested version of the application for your hardware. If you purchased the OpenBSD CD-ROM set you already have several popular ``packages'', and the ``ports'' collection. Instructions for installing applications from the various sources using the different installation methods follow. You should also refer to the packages(7) manual page. Installing applications from the CD-ROM package collection: The OpenBSD CD-ROM ships with several applications pre-built for various hardware architectures. The number of applications vary according to available disk space. Check the directory 4.2/packages/sh to see which packages are available for your hardware architecture. That directory will be on the same CD-ROM containing the OS installation files for your architecture. To install one or more of these packages you must: 1) become the superuser (root). 2) mount the appropriate CD-ROM. 3) use the ``pkg_add'' command to install the software. Example (in which we use su(1) to get superuser privileges, thus you have to be in group "wheel", see the manual page for su(1)). $ su Password: # mkdir -p /cdrom # mount /dev/cd0a /cdrom # pkg_add /cdrom/4.2/packages/sh/ # # umount /cdrom Package names are usually the application name and version with .tgz appended, e.g. emacs-21.3.tgz Installing applications from the ftp.OpenBSD.org package collection: All available packages for your architecture have been placed on ftp.OpenBSD.org in the directory pub/OpenBSD/4.2/packages/sh/ You may want to peruse this to see what packages are available. The packages are also on the OpenBSD FTP mirror sites. See http://www.OpenBSD.org/ftp.html for a list of current FTP mirror sites. Installation of a package is very easy. 1) become the superuser (root) 2) use the ``pkg_add'' command to install the software ``pkg_add'' is smart enough to know how to download the software from the OpenBSD FTP server. Example: $ su Password: # pkg_add \ ftp://ftp.OpenBSD.org/pub/OpenBSD/4.2/packages/sh/emacs-21.3.tgz Installing applications from the CD-ROM ports collection: The CD-ROM ``ports'' collection is a set of Makefiles, patches, and other files used to control the building and installation of an application from source files. Creating an application from sources can require a lot of disk space, sometimes 50 megabytes or more. The first step is to determine which of your disks has enough room. Once you've made this determination, read the file PORTS located on the CD-ROM which contains the ports tree. To build an application you must: 1) become the superuser (root) 2) have network access, or obtain the actual source files by some other means. 3) cd to the ports directory containing the port you wish to build. To build samba, for example, where you'd previously copied the ports files into the /usr/ports directory: cd /usr/ports/net/samba 4) make 5) make install 6) make clean Installing applications from the OpenBSD ports collection: See http://www.OpenBSD.org/ports.html for current instructions on obtaining and installing OpenBSD ports. You should also refer to the ports(7) manual page. Installing other applications: If an OpenBSD package or port does not exist for an application you're pretty much on your own. The first thing to do is ask if anyone is working on a port -- there may be one in progress. If no such port exists, you might want to tinker with the NetBSD pkgsrc. If you can't find an existing port, try to make your own and feed it back to OpenBSD. That's how our ports collection grows. Some details can be found at http://www.OpenBSD.org/porting.html with more help coming from the mailing list, . Administrivia: -------------- There are various mailing lists available via the mailing list server at . To get help on using the mailing list server, send mail to that address with an empty body, and it will reply with instructions. There are also two OpenBSD Usenet newsgroups, comp.unix.bsd.openbsd.announce for important announcements and comp.unix.bsd.openbsd.misc for general OpenBSD discussion. To report bugs, use the 'sendbug' command shipped with OpenBSD, and fill in as much information about the problem as you can. Good bug reports include lots of details. Additionally, bug reports can be sent by mail to: bugs@OpenBSD.org Use of 'sendbug' is encouraged, however, because bugs reported with it are entered into the OpenBSD bugs database, and thus can't slip through the cracks. As a favor, please avoid mailing huge documents or files to the mailing lists. Instead, put the material you would have sent up for FTP somewhere, then mail the appropriate list about it, or, if you'd rather not do that, mail the list saying you'll send the data to those who want it. For more information about reporting bugs, see http://www.OpenBSD.org/report.html